The key to industrial brush - paint roller brush
Drum paint brush, is a very common use of brush products, the key for the surface of the thrown items to carry out deburring, fine polishing and other solutions, is mainly made of fine wire frame, it contains a lot of sorting neat, flexion and extension of the fine brush wire composition.
Composed of a fine brush wire flexing outward. The polishing brush card in the stroke arrangement of moderate bench drill, vertical drill or stuck in the CNC lathe, horizontal grinding machine, can be carried out processing. For heavy large product workpiece processing, can be stuck in the air drill, hand drill. Ratio of speed depending on the size of the workpiece in 50-100 RPM/classification of independent selection. Left and right moving rate is about 30/ min up and down, generally left and right moving 8~10 times reciprocating can be. The special tool brush for deburring and polishing should be rotated to start or move the machining position. Plastic paint brush in the processing is best to use light grease, do not need to apply organic solvents. It is not suitable for high temperature, dry and high speed operating conditions. Deburring polishing special tool brush in the selection of diameter, ordinary paint brush is generally 5~15% larger than the processed diameter can be.
Application of industrial brush, should prevent the interaction force is too large, otherwise it will make the brush wire bending deformation, friction after heat accumulation, brush damage becomes blunt, the service life greatly reduced. If you feel that the laser cutting energy of the brush is insufficient, it is proposed that the application of a sharper brush or a moderate increase in the brush speed ratio, and do not have to apply too much interaction force.