Soak in water

Before rolling, it must be soaked in water to soak soft, just like a mop, mop for a long time no need, dry like a towel, and even together, and as long as the water, you can repair in a short time as the original, but also can clean up the waste residue, if the residue and paint together on the wall, such as powder paint after picking out more trouble. After the natural roller is soaked in water, it should not be too wet, otherwise it will affect the early work of the paint coating, and it should be rolled three times on the dry newspaper after softening to ensure that the upper water mark is removed.

dip

When the roller is painted, it can not be directly immersed in the paint bucket, one will cause the consumption of the paint material, and the other is not necessarily the level of installation, after all, the diameter of the paint bucket itself is not large, it is likely to produce contradictions with the specifications. And to dip, the best way is to apply the roller plate material, its shape is a bit like a dust pan, can be just the wide side of the silver roller size, after the paint is installed, you can start the flip dip, and after two trips, you can ensure that the paint is evenly rolled all over the roller.

whitewash

When brushing, the roller in the wiping order is from the top down, and then from the bottom up, is a "V" or "W" way of painting, and the painting process should pay attention to symmetry, an area should not be repeatedly rolled on several times, otherwise it may lead to uneven paint coating layer, and after brushing, but also use the brush to carry out a certain light repair, some liquid beads brush off. Dry side left a convex watermark, the other half of the brush must be brushed twice, once can be appropriate to add water, dilute the bottom, in other words, practice hands, the second layer can not mix water, such a thick paint, paint also need to be careful.

anaphase

After the end of the painting, it is necessary to carry out post-production, and the key is to finish some simple work, clean up the soft brush roller in water, and dry it in a cool place. If the paint is not used, it can be solved, and do not put it indoors, because there is formaldehyde inside, it may cause indoor decoration pollution to increase.