Decades of production experience

A professional manufacturer of roller brushes, but also a series of decoration tools such as ordinary paint brushes and shovel blades.

Service consultation hotline

0574-88545234

Home>Brief introduction of high pressure built-in roller brush wholesale type in metallurgical industry

Brief introduction of high pressure built-in roller brush wholesale type in metallurgical industry

Release Time:2021-06-16
Views:11Time

In the contemporary metallurgical industry, several production processes and processes will be applied to brush roller products, the following brief details.


1, pre-pickling line (pre-pickling line) : mainly brush roller to descaling.


2, PicklingLine (PicklingLine) : the key brush roller to remove the stains caused in the whole process of pickling.


3, CleaningLine: Activate the surface containing ester for reasonable deoiling; And remove paint brush plant solution in the acid and alkalinity of constant oil stains; It can remove rust or grease at an angular speed of less than 150 m/min.


4, cable and seamless steel tube (Wirerod and steel tube) : the key function of paint brush equipment is to remove scales.


5. Stainlessline: descaling with brush roller to prevent the effect of silver and brass; And can be hot quenching pickling line, reduce peak height to width ratio (polishing), can be used in continuous quenching pickling line casting and rolling process.


6, waterproof CoilCoating continuous coating: paint brush wire to get reasonable chromium solution and coating closely adhered to the steel plate.


7. Galvanizingline: to eliminate plate surface residue and activate the surface of steel plate; Clean the surface of the steel plate with water.


8, surface solution line (SurfaceTreatingSteelLine) : used to clean the plate before plating, according to slight polishing activated plate surface.


9. Rollpolishing of hot-rolled strip steel: It is possible to use the brush roller to eliminate residue on the surface of the roller during work.




Brief introduction of high pressure built-in roller brush wholesale type in metallurgical industry